太赫兹聚合物光子晶体光纤关键制备工艺研究

针对太赫兹聚合物光子晶体光纤的应用需求,对聚合物光纤的制备材料、预制棒制备、拉伸工艺等关键制备工艺进行了研究.分析了聚合物材料的特性,并进行实验验证,结果表明ZEONEX材料的吸收系数低于3cm~(-1),吸水性低于0.01%,玻璃化转变温度和分解温度分别高达136℃和420℃,在太赫兹光纤制备中具有优良性能.预制棒制备和光纤拉伸的工艺方面,在注塑法的基础上改进了模具系统,使用可控的微压拉丝技术,在10200Pa范围内可实现±1.5Pa的微压差精确控制,较大程度上提高了光纤预制棒的成品率和光纤的形变控制,有望制备出高空气填充率的聚合物光子晶体光纤.     

Synthesis,Antibacterial and Pharmacokinetic Evaluation of Novel Derivatives of Harmine N9-Cinnamic Acid

A series of 16 new derivatives of harmine N⁹-Cinnamic acid were synthesized and fully characterized using NMR and MS. The in vitro antibacterial evaluation revealed that most of the synthesized harmine derivatives displayed better antibacterial activities against Gram-positive strains (S. aureus, S. albus and MRSA) than Gram-negative strains (E. coli and PA). In particular, compound 3c showed the strongest bactericidal activity with a minimum inhibitory concentration of 13.67 μg/mL. MTT assay showed that compound 3c displayed weaker cytotoxicity than harmine with IC₅₀ of 340.30, 94.86 and 161.67 μmol/L against WI-38, MCF-7 and HepG2 cell lines, respectively. The pharmacokinetic study revealed that the distribution and elimination of 3c in vivo were rapid in rats with an oral bioavailability of 6.9%.     

通过调节共轭聚合物侧链实现可绿色溶剂加工的非富勒烯太阳能电池

有机太阳能电池(OSC)经过长期的发展,其能量转换效率(PCE)已快速推进至14%–16%,基本接近可商业化应用的范围,但在目前所见报道的高效率OSC器件的制备过程中,活性层薄膜的加工大多采用氯苯、二氯苯、氯仿等毒性较高的含卤/芳香性试剂,此类试剂对环境及人类健康的危害非常高。在本工作中,我们基于已报道的高效率给体共轭聚合物PBDB-T,通过扩大共轭侧链结构与增长柔性烷基侧链的方式,合成了新型给体聚合物PBDB-DT。PBDB-DT中较长的柔性烷基侧链保证了其在低毒性溶剂四氢呋喃(THF)溶液中良好的溶解度,同时,扩大的共轭侧链也有效增强了其在THF中的溶液聚集作用,这一特性对于在非富勒烯型OSC器件中获得较好的光伏性能尤其重要。当采用非富勒烯小分子IT-M作为电子受体材料时,以THF为主溶剂加工的基于PBDB-DT:IT-M的OSC器件可以获得10.2%的能量转换效率。     

GB/T19001质量管理体系用于高校教学实验室管理的初步实践

探索高校教学实验室以GB/T19001-2016《质量管理体系要求》为指导准则,拓宽改进实验室管理工作的新思路及应用实践。以解读标准中质量管理第一原则及9.1.2、10.3条款为例,论述转变管理理念,进一步实践以人为本,促进实验技术和管理相关人员"全员参与"和"全过程参与"意识的培养,逐步提升实验室管理效率和水平,提高学生对实验教学服务的满意度。     

高能量密度LiMn0.6Fe0.4PO4/C的制备及其电化学性能

以Mn(NO_3)_2、Fe(NO_3)_3·9H_2O、NH_4H_2PO_4、LiOH·H_2O为原材料,采用改进的溶胶凝胶法制备了具有高能量密度的Li Mn_(0.6)Fe_(0.4)PO_4/C材料。该方法通过金属和多种配体配位构筑的框架,把得到的一次纳米颗粒构筑为类球形的二次颗粒,即发挥了纳米材料优异的电化学性能,又提高了材料的压实密度,电池的能量密度可提升约30%。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、交流阻抗谱(EIS)、振实密度、粒度以及电化学测试等表征手段对材料的晶体结构、形貌和电化学性能进行了较系统的研究,结果表明此方法制备的LiMn_(0.6)Fe_(0.4)PO_4/C材料不仅具有较高的振实密度和电压平台,还具有优异的电化学性能:振实密度为1.3 g·cm~(-3),且在1C倍率下,放电中值电压为3.85 V,100次循环后,比容量仍有142.3 mAh·g~(-1),容量保持率为99.4%。     

N-取代2-(5-氯-2-(金刚基-1-基)-1H-吲哚-3-基)-2-氧代乙酰胺衍生物的合成及其细胞毒活性

以金刚烷甲酰氯为起始原料,经亲核取代、吲哚环合及酰化反应制得中间体2-(5-氯-2-金刚烷-1H-吲哚-3-基)-2-氧代乙酰（4）; 4与取代胺反应合成了14个新的N-取代2-(5-氯-2-(金刚基-1-基)-1H-吲哚-3-基)-2-氧代乙酰胺衍生物(5a~5n),其结构经¹H NMR, ¹³C NMR和HR-MS(ESI)表征。采用MTT法研究了化合物对人子宫颈癌细胞（Hela）、乳腺癌细胞（MCF-7）和人肝癌细胞（HepG-2）的体外抗肿瘤活性。结果显示：化合物2-(5-氯-2-金刚烷-1H-吲哚-3-基)-N-(3-氯-4-氟苯基)-2-氧代乙酰胺（5e）的体外抑制活性最优,IC₅₀分别为14.10、 10.56和8.55 μmol·L^-1。     

Cross-section measurement for Ni（n,x）^58（m＋g）Co, Ni（n, x）^60mCo, Ni（n,x）^61Co and Ni（n,x）^62mCo reactions induced by neutrons around 14 MeV

The cross sections of Ni(n,x)~(58(m g))Co,Ni(n,x)~(60m)Co,Ni(n,x)~(61)Co and Ni(n,x)~(62m)Co reactions induced by neutrons around 14 MeV were measured in this work and calculated by a previously developed formula in this work.The neutron flux was determined using the monitor reaction ~(27)Al(n,α)~(24)Na and the neutron energies were measured with the method of cross-section ratios for ~(90)Zr(n,2n)~(89)Zr to ~(93)Nb(n,2n)~(92m)Nb reactions.     

Optimized Second Harmonic Generation of Femtosecond Pulse by Phase-Blanking Effect in Aperiodically Optical Superlattice

In order to minimize the effect of the unconsidered frequency components on the generated compression pulse, the phasing-blanking effect is taken into account of designing the one~dimensionai aperiodic domain reversal structure. Hierarchic genetic algorithm for the design of a domain reversal grating to modulate the spectrum and phase of the generated SH pulse simultaneously are presented. Our simulation shows that the quality of an output pulse is fairly improved.     

BEPCII Injector Linac Upgrade and Beam Instabilities

The upgrade project of the Beijing Electron Positron Collider （BEPCII） and its injector linac is working well. The linac upgrade aims at a higher injection rate of 5OmA/min into the storage ring, which requires an injected beam with low emittance, low energy spread and high beam orbit and energy stabilities. This goal is finally reached recently by upgrading the linac components and by dealing with rich and practical beam physics, which are described in this study.